I am interested in this product
Close Form
Cooper Environmental’s Xact 640 has the unique ability to generate high time resolution metals measurement in stacks. This unique capability has the potential to qualify as a substitution for the combination of a Hg/ PM CEMs application as well as the potential for a pollution control system feedback loop that could result in the reduction of pollution control consumables. Systems have been site certified for compliance measurements at hazardous waste incinerator and secondary lead smelter sites.
I am interested in this product
Close Form
Downloads
Detailed Specs
CES’s Xact 640 system uses reel-to-reel (RTR) filter tape sampling and nondestructive X-ray fluorescence (XRF) analysis to monitor stack metal emissions. An isokinetic sub-sample of stack gas is taken from the stilling chamber and drawn through a chemically reactive filter tape. Vapor phase metals, including mercury (Hg), are deposited along with the particulate matter (PM) on the filter tape.
Specifications
Measurement method.: Based on EPA Method IO 3.3: Determination of Metals in Ambient PM Using XRF
Key applicable elements.: Sb, As, Ba, Cd, Cr, Co, Cu, Fe, Pb, Hg, Mn, Ni, Se, Ag, Sn, Tl, V, Zn, and more available
Measurement range.: Demonstrated up to 1963 μg/dscm
Detection limits (IF, EPA IO 3.3)3.: Metal and sample time dependent; refer to the minimum detection limit (MDL) data
Sampling and analysis times.: Every 15, 30, 60, 120 minutes, depending on the per sample mass
Calibration stability check frequency.: Automatically with each sample analyzed
Estimated recalibration frequency.: Annually, when manufacturer’s operating recommendations are followed
Sample flow rate.: 1.051pm
Linearity.: Correlation coefficient >0.98
Required operating environment.: Lab environment with temperature controlled to 20±3°C (68°F)
