Vehicle Testing & Safety >> HuDe

Shock Absorber Test System

I am interested in this product

    Your Name (required)

    Your Email (required)

    Contact Number

    Product Name

    Close Form

    I am interested in this product

      Your Name (required)

      Your Email (required)

      Contact Number

      Product Name

      Close Form

      Downloads

      Detailed Specs

      The test stand is measuring the power and the position of the shock absorber, which are adjusting through a test program which works continuously variable with default of up and down movement, revolutions and speed of rotation.

      Between the gear and the bearing block is a torsion stiffness clutch, which pass on the torque without torsional vibration on the eccentric shaft (conversion of rotary movements in translator movements) of the bearing block.

      – The power and the position on the shock absorber will measured by the test system
      – Engageable stroke in 8 steps from 0 up to 100 mm (continuously variable setting)
      – Continuously variable revolutions / speed of rotation from 0,1 up to 1.600 1/min by software
      – Continuously variable position of the measuring bridge from 100 up to 1.500 mm
      – Measurement, calculation, display, recording and documentation of:
      Power on the shock absorbers
      Stroke of the shock absorbers
      Speed of the shock absorbers
      – Complete engineering, incl. Mechanic, installation and start off operation at the customer